 |
 |
CENTRALIZED PRESSURE REGULATION
All
pressure regulations for the entire pneumatic system are centralized
at front of the machine for added convenience for pressure regulations.
Sectional
pressure adjustments for all pressure rollers ensure consistent
pressure. |
|
|
 |
VERTICAL SPINDLE ADJUSTMENT UP TO 60 MM
It
allows to fit several tools on the vertical spindle, eliminating
troublesome cutter change. The 60mm spindle adjustment provides
full utilization for a single cutter. |
|
|
 |
CONVENIENT SPINDLE ADJUSTMENT
All
control levers for the spindles are located at the front of
the machine for convenient adjustment. Each spindle is provided
with a mechanical digital readout, giving accurate adjustment. |
|
|
 |
CENTRALIZED LUBRICATION
The
spindles are lubricated by the centralized lubrication system
for convenience. |
|
|
 |
POWER INFEED TABLE ROLLER
The roller in the infeed table is powered, providing a smooth feeding effect for feed stock. |
|
|
 |
AIR LOADED SIDE PRESSURE WHEELS
The front
side pressure wheel on left vertical spindle fully eliminates
unsmooth problem when feeding short or narrow stock. The pressure
plate is easy to adjust. |
|
|
 |
VERSATILE REAR BOTTOM HORIZONAL SPINDLE
Can be
fitted with sawblade or planer knife. Changing tools is very
convenient. |
|
|
|
|
 |
HYDRAULIC SUPPORT ON TOP AND BOTTOM SPINDLE
Specially
designed hydraulic supports on the top and bottom spindles assure
maximum stability while performing high speed and heavy duty
machining. |
|
|
 |
AIR
LOADED FRONT PRESSURE PLATE
The front pressure plate for top spindle is available to apply an air loading device ensuring maximun stability while performing high speed cutting. |
|
|
 |
CONVENIENT INFEED ADJUSTMENT
The
infeed table and fence are conveniently adjusted by the separate
control levers.
OVER HEIGHT PROTECTION
In case
workpiece exceeds the rated maximum height, it will be restricted
by the over height protection device provided at the workpiece
infeed end. |
|
|
 |
UNIVERSAL SPINDLE
This
spindle can be tilted for complicated cutting jobs. |
|
|
 |
STRAIGHT KNIFE JOINTER
The straight knife jointer is controlled by manual. Easy to operate and best quality of product.
Automatic feed of jointing stone gives quick and accurate knife jointing operation. |
|
|
 |
PRORFILE
KNIFE JOINTER
The
fully automatic knife profile jointer is controlled remotely
for convenient knife jointing operation.
The knife
profile jointing is performed directly on the moulder for consistent
cutting circle for all knives . It assures repeatitive profile
accuracy and superior surface effect.
The jointing
stone feed is pneumatically operated. |
|
|
 |
SPINDLE DIGITAL POSITIONING CONTROLLER
Available to equip for controlling any spindle as requested.
The digital positioning controller permits fast, convenient and high accuracy spindle positioning. |
|
|
 |
ATS SYSTEM
The ATS system employs a PLC control combined with touch sensing screen for maximum operation convenience.
The control system provides 200 sets memory capacity. |
|
|
 |
FEED
MAGAZINE
This
mechanism provides maximum convenience for
feeding stock into the machine, keeping downtime to the minimum, and increasing the rate of production.
Especially
helpful when cutting short stock. |
|
|
|
|
|
|
